本工具适用于使用慧荣主控的固态硬盘量产开卡使用。
慧荣sm2246EN主控芯片开卡工具MPN0325A版本，本程序支持多颗FLASH。压缩包内有FLASH支持列表。
设置密码为2个空格键。
本版本更新内容：
1.add Show all RDT result button on 8Port RDT tagPage
2.add Compare SN function on BarCode dialog.
3.Fix Dump Erase count issue for TLC NF.
4.Add 0xF1/0x28 vendor command on DRAM Test procedure.
5. Check SN wheather is reaptly on Barcode dialog
6.Add SLC Region Capacity on CID setting for TLC.
7.Add new case "A-Top" with in DRAM Vendor fields
it is the same as "NANYA" setting, PM Stanley request.
8.Modify Verify Card Size rule for SM2246 TLC, RD David request
9.Fixed 8Port RDT Result Display.
10.If SN repetition, modify the Warning message box to "Continue" and "Exit"
11. If it is 0MB after scan drive, it will show"Can't Detect Drive"
12. Add "SaveSN WWNfail".
13. 8Port RDT repaint when change Tag page or screen move.
14. Add 4th fail case when RDT fail, "0xFF Pattern"
15. Mofied Time stamp units as "Secs" on MarkBad TagPage.
16. Scan Drive first when open MP tool, in PNY mode.
17. Modified 8 Port RDT display.
18. On BarCode, add "check Whether is 8 SN inputting" and
- "Check whether is any SN exist"
19. Modify message button text as "Continues" and "Return"
20. Remove Check PNY SN format on QC procedure.
21. On Barcode, add Warning message box for "Continues" and "Return".
22. When enable Barcode, if some Port, it didn't input SN, it will show warnong
messsage "Port # Serial Number is empty in Barcode!""
23. ON Scan Drive, if it didn't input SN on Barcode, it will show Warning message.
24. After push "finish" in Barcode, it will scan drive again automatically.
25. Mark Check PNY SN format.
26. Add Tag page "Assembly Verification" for PNY, in setting.set [OPTION]
ENABLEASSEMBLYVERIFICATIONPAGE=1
27. Add "Dual DRAM" option for Pretest option setting
28. Add display RDT Hours and Loops in "8port RDT result" tag page.
29. For PNY, it will show QList on initial MP tool.
本资源为网盘资源，需输入提取码: 7wn5提取资源。